HYBRID OPEN PRODUCTION
Open Production Hybrid Truck/SUV
* Updated September 7th, 2021 *
Click here to download a PDF.
Vehicles built from a full sized 2 or 4 wheel drive utility or SUV type vehicle. Vehicle must have been series produced in quantities of at least 5000 units within a 12-month period and be readily available to the general public in the U.S.A. Vehicle must be marketed as full size. Vehicle must be currently produced within the last five(5) model years.
Entrants in this class shall comply with all applicable general regulations.
Manufacturer’s body, engine, transmission, differentials, and chassis combinations must be retained. This class is an open class and all components will be considered open unless restricted herein. No predating or postdating of any component allowed unless offered by the manufacture as a direct replacement part.
NOTE: The TR abbreviations listed under this class (I.E. TR1 HELMETS) refer to TR cross reference listings in the front of this book. These TR cross-referenced listings are part of the class rules. Where a conflict occurs between the TR cross-referenced listing and a rule contained under this class, the rule contained under this class takes priority.
TR2 PROTECTIVE CLOTHING
TR3 EYE PROTECTION and DENTURES
TR4 HEAD AND NECK RESTRAINTS
TR5 FIRST AID KIT
TR6 EMERGENCY SIGNALING DEVICES
TR9 FIRE SUPPRESSION EQUIPMENT
TR10 SURVIVAL SUPPLIES
TR11 SHOCK ABSORBERS and BUMP STOPS
TR12 SECONDARY SUSPENSION
TR13 WHEELS and TIRES
Fasteners must remain stock material. Any fastener may be upgraded with steel grade 8.
STEERING and BRAKE COMPONENTS
All high power lines must be encased for protection, lines and encasements must be painted red.
Stock head and tail lights must be retained in working condition at all times.
Rearward facing amber and blue lights are required.
Any manufacture additional lights may be used.
TR22 FUEL TANKS
TR23 FUEL FILLERS LINES, VENTS, and CAPS
Fuel cell mandatory.
ENGINE, TRANSMISSION and DRIVELINES
TR25 ENGINE REPLACEMENT
TR29 DRIVE SHAFTS
TR30 FLYWHEEL SHIELDS
TR31 FLUID COOLERS
TR32 AUXILIARY EQUIPMENT
VEHICLE SAFETY EQUIPMENT
TR34 ROLL CAGES
TR35 SAFETY HARNESS
TR36 SAFETY NETS
GENERAL VEHICLE COMPONENTS
TR38 DRIVERS COMPARTMENT
TR39 DOORS AND LATCHES
TR44 BUMPERS and HAZARDOUS PROTRUSIONS
Stock bumpers required.
Bush guards and lights may be attached to bumper.
TR46 SKID PLATES
TR48 CHASSIS and BODY
Manufacturer’s body chassis combinations must be retained. No predating or updating chassis or bodies.
TR50 IDENTIFICATION MARKINGS
M400 will assign race numbers.
TR51 ADVERTISING on VEHICLES
TR52 RADIO EQUIPMENT
TR54 TRACKING DEVICE